Committed to Agriculture. Enhancing Rural Lifestyles

Search Inventory    Search Products & Site

Commercial Mowers 636M

Double tap to zoom

 

Features

  • Controls are easy to locate and use for operator comfort and productivity
  • Compact design for easy hauling and excellent maneuverability
  • Hydrostatic drive system is reliable and easy to use
  • Safety features are built-in to protect the operator and bystanders
  • Commercial-quality engine is reliable and provides excellent performance and life
  • 36-in. (91-cm) fabricated mower deck is made from 7-gauge, 0.177-in. (4.6-mm) steel for reliability and performance
  • Maintenance is simple and easy to reduce time and cost

Specifications

   John Deere 636M QuikTrak™ Stand-On Mower 
ENGINE
Manufacturer  
Model no. FS600V
Horsepower (gross) At 3,600 rpm, 18.5 hp
13.8 kW
Displacement 36.8 cu in.
603 cc
Cylinders Two, V-twin
Crankcase capacity With filter, 2.2 qt
2.1 L
Oil filter Full flow, replaceable
Lubrication Full pressure
Cooling Forced air
Air cleaner Dry type, dual stage
FUEL SYSTEM
Fuel type Gasoline
Fuel consumption  
Fuel tank capacity 5.5 U.S. gal.
20.8 L
Fuel tank switch/shut-off valve Yes
ELECTRICAL SYSTEM
Charge system At 3,600 rpm, 15 amp
Battery voltage 12 V
Cold cranking amp 300 amp
Hour meter Digital
Operator presence starting system Yes
DRIVETRAIN
Hydraulic pumps Hydro-Gear, 0.61 cu in.
10 cc
Wheel motors Hydro-Gear HGM-P, 12 cu in.
196 cc
Travel speed Forward
Infinite, 0-8.2 mph
Infinite, 0-13.2 km/hReverse
Infinite, 0-3.5 mph
Infinite, 0-5.6 km/h
Speed and direction control Twin hand-controlled levers
Hydraulic capacity With filter, dry, 5 qt
4.7 L
Hydraulic oil cooler Yes
Filter Spin-on replaceable
TIRES
Drive tires 18x8.5-10 Turf Master
Rear tires  
Load rating 4 PR
BRAKES
Dynamic braking Dual hand-controlled levers
Park brake Tire engagement
Park brake actuation Hand lever
PTO
Type Electro-magnetic with brake, 125 lb-ft
169 Nm
Drive Dual B-section V-belt with Kevlar� cord
MOWER DECKS
Available widths 36 in.
91.4 cm
Deck construction Fabricated steel, floating mount system
Deck thickness 7 gauge
0.18 in.
4.6 mm
Discharge Side
Height-of-cut range Increments
0.25 in.
0.64 cm
1.25-5 in.
3.2-12.7 cm
Cutting width 36 in.
91 cm
BLADES
Length 18 in.
45.7 cm
Thickness 0.203 in.
0.516 cm
Tip speed 18,900 fpm
5,761 m/min
Number Two
WHEELS
Caster wheel type No-flat semi-pneumatic with sealed bearings
Caster wheel size 11x4-5
Front anti-scalp rollers  
Rear anti-scalp rollers  
DIMENSIONS
Length 62 in.
157.5 cm
Width Deflector down, 49.5 in.
125.7 cm
Height 46 in.
117 cm
Weight With full fuel and oil, 731 lb
332 kg
ADDITIONAL INFORMATION
Date collected 21-Apr-2017